Determine if a remote host is reachable and how packets of data
are routed to that system.
Reference
Control Information
Object Name |
IcmpClientCtl.IcmpClient |
File Name |
CSICMX11.OCX |
Version |
11.0.2210.1824 |
ProgID |
SocketTools.IcmpClient.11 |
ClassID |
EFBC543A-466D-4C07-A884-F28590D095BD |
Threading Model |
Apartment |
Help File |
CST11CTL.CHM |
Dependencies |
None |
Standards |
RFC 792 |
Overview
The Internet Control Message Protocol (ICMP) is commonly used to
determine if a remote host is reachable and how packets of data are
routed to that system. Users are most familiar with this protocol as
it is implemented in the ping and traceroute command line utilities.
The ping command is used to check if a system is reachable and the
amount of time that it takes for a packet of data to make a round
trip from the local system, to the remote host and then back again.
The traceroute command is used to trace the route that a packet of
data takes from the local system to the remote host, and can be used
to identify potential problems with overall throughput and latency.
The control can be used to build in this type of functionality in
your own applications, giving you the ability to send and receive
ICMP echo datagrams in order to perform your own analysis.
Requirements
The SocketTools ActiveX Edition components are self-registering
controls compatible with any programming language that supports COM
(Component Object Model) and the ActiveX control specification. If
you are using Visual Basic 6.0 you must have Service Pack 6 (SP6)
installed. It is recommended that you install all updates for your
development tools.
This control is supported on Windows 7, Windows Server 2008 R2 and
later versions of the desktop and server platforms. If you are using
Windows 7, you must have Service Pack 1 (SP1) installed as a minimum
requirement. It is recommended that you install the current service
pack and all critical updates available for the operating system.
This product includes both 32-bit and 64-bit ActiveX controls.
Native 64-bit CPU support requires the latest 64-bit version of
Windows 7, Windows Server 2008 R2 or later versions of the Windows
operating system.
Distribution
When you distribute an application that uses this control, you can
either install the file in the same folder as your application
executable or as a shared component in the appropriate system folder.
If you install the control in the system folder, it is important that
you distribute the correct version for the target platform and it
must be registered. If you install the control in the same folder as
your executable, it is recommended that you use registration-free
activation or COM redirection to ensure that the correct version of
the control is loaded by the application.
|